ASG Baseball Cap - H98 Camo
ASG
This H98-Camo cap features the ASG logo and new slogan, “#PoweringYourGame” written on the front with “ActionSportGames” written on the back. It...
View full detailsThis H98-Camo cap features the ASG logo and new slogan, “#PoweringYourGame” written on the front with “ActionSportGames” written on the back. It...
View full details‘Hit hard, hit fast with this market-leading HPA regulator’ One for the hardcore HPA fans out there, the superb Wolverine Storm Category 5 HPA Reg...
View full detailsThe Warface barrel extension tube (silencer) is the perfect finishing touch for your airsoft rifle or pistol! Designed to match the barrel taper o...
View full detailsA complete hammer for the Dan Wesson 715 pistols. Silver in colour. Does NOT include hammer springs. Part number #4-01.
This is the spring guide for the dummy bolt cover return spring. Sits inside the upper receiver of the EVO. Part BO24-2.
A recoil spring for the ASG/KJW P-09. Part #72.
Hammer assembly for ASG/KJW P-09 pistol. ASG reference #17657, part references #8,11,21,58 all included.
A replacement feed lip for the ASG/P-09 magazine Suitable for both CO2 and green gas magazines.
The Scorpion EVO 3 is the very first AEG to be designed and manufactured in Europe. The EVO 3 has been envisioned, developed and built by ASG, ...
View full detailsThis original ASG part allows you to use M4/M16 magazines in your CZ 805 Bren. Available in black or tan. Installs in less than one minute.
This unique grip that is distributed by ASG but actually constructed by real steel manufacturer HERA Arms is a great way of achieving a unique loo...
View full detailsASG's AUG XS is based upon the more compact Para version of the standard AUG. This particular variant is derived from the AUG A3 XS model, comple...
View full detailsThe EVO ATEK Thors Hammer Mag Release is the embodiment of style and substance. Bringing an iconic never before seen design to the EVO ATEK (Advanc...
View full detailsAn 11.1V battery designed to fit in most stock tubes. 1100mAh and a 20C rating. This ‘stick’ type battery is specifically ideal for smaller batter...
View full detailsThe PC01 is a plate carrier which provides its wearer with both a comfortable fit and a tactical edge whilst being fully open to a wide range of a...
View full detailsThe PC01 is a plate carrier which provides its wearer with both a comfortable fit and a tactical edge whilst being fully open to a wide range of a...
View full detailsThese button-activated, quick release polymer holsters from Strike are phenomenal value for money. A knurled attachment point on the rear allows t...
View full detailsA high quality 11.1V 30C LiPo battery from ASG which comes in a handy storage box. 2200mAh rating for extra long lasting power. Cell size: 105mm ...
View full detailsHigh quality selector plate from ULTIMATE. Incredibly strong construction is highly resistant to flex, breakage and electrical heat build-up. Suit...
View full detailsConstructed from solid steel with an attractive ribbed external finish. These high performance cylinders are surface treated to ensure minimal fri...
View full detailsThe Scorpion EVO 3 is the very first AEG to be designed and manufactured in Europe. The EVO 3 has been envisioned, developed and built by ASG, ...
View full detailsThis Magwell adapter is designed for the ASG Scorpion Evo and is made from the same Glass Nylon Fiber as the original furniture, ensuring it match...
View full detailsThe Advanced Tactical Ergonomic Kit (or ATEK) is a Furniture Kit designed by ASG for their Scorpion Evo, which is manufactured from the same Glass...
View full detailsA replacement cylinder/drum for older Dan Wessson 715 series revolvers. This will allow for the use of Moon clips, a super-fast way of reloading ...
View full detailsA large female Tamiya connector primarily used on batteries. Replace your old or worn connector. Improve conductivity.
One-piece mount intended for lightweight 30mm scopes or dot-sights. Keeps the scope/dot-sight higher off the rail for faster aiming. Holds scope/d...
View full detailsThis single magazine pouch is made of Cordura, a high-performance fabric that is resistant to water, impact and tears. It can hold one rifle magaz...
View full detailsThe PC01 is a plate carrier which provides its wearer with both a comfortable fit and a tactical edge whilst being fully open to a wide range of ...
View full detailsOne of the most popular airsoft pistols now has a special edition! This Orange version is exceptionally limited, we only have x3 units and likely...
View full detailsA high quality 11.1V 30C LiPo battery from ASG which comes in a handy storage box. 2200mAh rating for extra long lasting power. Cell size: 105mm ...
View full detailsBrand new piston block rubber for ASG Shadow 2 pistol. ASG pistol reference #19307, part reference #41. Black in colour.
Brand new piston block for ASG Shadow 2 pistol. ASG pistol reference #19307, part reference #15. Black in colour.
Solid steel trigger from ULTIMATE. Very strong construction minimises possibility of snappage. Suitable for AK series AEGs. View our entire range ...
View full detailsA premium, high strength spring guide with full metal construction. Features steel bearings under a rotatable guide to minimise friction when the ...
View full detailsConstructed from solid steel with an attractive ribbed external finish. These high performance cylinders are surface treated to ensure minimal fri...
View full detailsConstructed from solid steel with an attractive ribbed external finish. These high performance cylinders are surface treated to ensure minimal fri...
View full detailsA PVC tactical patch with a velcro back. The official ASG logo patch in bold pink. Pink / White in colour. Great for applying to tactical vests ...
View full detailsThe official ASG Medic armband. It uses a Velcro strap to securely fit onto the user’s bicep. Medic cross and ASG logo on armband. White / Red in ...
View full detailsReplacement Dust Cover / Bolt Cover For Evo 3 A1, Carbine and B.E.T Models. Part No: 17774. Black in colour.
This is an original accessory supplied to ASG from CZ. Made from CNC Aluminum. Size: 18mm CW Black in colour.
These button-activated, quick release polymer holsters from Strike are phenomenal value for money. A knurled attachment point on the rear allows ...
View full detailsReplacement Front Sight for ASG STI Tac Master 1911 M.E.U. Also fits KJW KP-07. Does not include a screw. Part No: #1-1
CO2 magazine valve for the ASG STI Combat Master, code 19576. Part number A16.
Front sight for ASG P-07 pistol. ASG pistol reference #16720, part reference #2-03.
A 14rd magazine for the ASG CZ SP-01 Shadow Spring pistol (Ref. 17655). Full ABS plastic construction with added weight. Black in colour.
The brand new EVO 3 Carbine BET, in stock right now, ready to ship! The EVO 3 has been envisioned, developed and built by ASG, to bring the ai...
View full detailsA brand new ASCU wire harness and board for the pre 2020 CZ ASG EVO 3 Scorpion, as well as the A1 and BET models. Original ASG ASCU parts. Include...
View full detailsSignup to the AirsoftEire.com mailing list to be the first to hear about new products and special offers
AirsoftEire, The Brewery Business Park, Dundalk, Louth, A91 N6C0
Tel: 042 9351155
Copyright © 2024 AirsoftEire.