Sold out
Umarex Glock 17 gas blowback pistol manufactured by VFC. This is the green gas blowback version. Fully licensed replica of the Glock 17 Gen 5 pis...
View full details
Sold out
A Picatinny riser from Novritsch. Designed to have the same length as the Red Dot V3 & T1 style Red Dots. Ideal if you need your red dot to si...
View full details
A quality CNC'd aluminium charging handle for the AAP-01 pistol. Attaches to the back of the bolt and gives the shooter a large, easier to grab po...
View full details
Noise reduction rating NRR24. Comfortable ear cushions for tight seal. Foldable for storage and protection. Tested and approved in accordance wit...
View full details
A quality CNC'd aluminium charging handle for the AAP-01 pistol. Attaches to the back of the bolt and gives the shooter a large, easier to grab po...
View full details
Noise reduction rating NRR24. Comfortable ear cushions for tight seal. Foldable for storage and protection. Tested and approved in accordance wit...
View full details
A fully licensed replica from Cybergun of the FN Herstal semi-automatic pistol. Very detailed piece with lots of realistic engravings displaying ...
View full details
Designed for the M4/M16 series platform. Ambidextrous capability, allows the user to release the magazine from the left or right of the receiver. ...
View full details
The TDC (Top Down Centre) Trolley Converter is designed for the ICS Hop-up chamber to function perfectly with the R-Hop setups. The trolley is f...
View full details
This R-HOP arm is designed to be a drop-in upgrade for a TDC (top-down-centre) evenly forced pressure set up. Inspired by the self-leveling nub fe...
View full details
The TDC (Top Down Centre) Trolley is designed for the Retroarms Hop-up chambers to incorporate the traditional usage of M-nubs which works perfec...
View full details
The TDC (Top Down Centre) Trolley is designed for the Maxx Hop-up chambers to incorporate the traditional usage of M-nubs which works perfectly wi...
View full details
The Advanced locking ring is designed to replace the current Oring (Normally brass) ring at the end of setting up the hop unit, however, with the ...
View full details
Save 70%
This is an entire set of pre-assembled internals for the G&G 450rd long magazine. To install, simply remove the button screw at the base of y...
View full details
Great value knee pads from KombatUK. Feature a thick, comfortable backing and hard plastic X shell style protective plate. Two velcro leg straps k...
View full details
The TDC (Top Down Centre) Trolley is designed for the Maxx Hop-up chambers to incorporate the traditional usage of M-nubs which works perfectly wi...
View full details
The TDC (Top Down Centre) Trolley is designed for the Maxx Hop-up chambers to incorporate the use of tensioner nubs specifically for Flat-hop buil...
View full details
Designed especially for the Maxx Hop-up units to address the issue of axial displacement of the chamber caused by two factors. Firstly the outer b...
View full details
Sold out
Great value knee pads from KombatUK. Feature a thick, comfortable backing and hard plastic x shell style protective plate. Two velcro leg straps k...
View full details
Sold out
This MLOK Q.D Sling Point from Novritsch allows you to add a Q.D sling swivel to your MLOK rail. Can be mounted to any location on a MLOK handgua...
View full details
The SV98 sniper from Snow Wolf is a substantial rifle with an ergonomic stock just like the L96. It has a quality polymer stock with full metal u...
View full details
The Invader Gear Revenger Pants are made out of ripstop fabric made from 65% cotton and 35% polyester, with double stitching in key areas. This ...
View full details
220 BB capacity, suitable for the JG SG552. Plastic construction. Winding required. Retail boxed.
Sold out
The Real Avid Universal Smart Mat is a real steel gun cleaning mat but is also suitable for airsoft replica maintenance. It’s large enough to hand...
View full details
High duty boot from Magnum from ecologically sustainable production, made from quality rip-stop nylon. Recycled plastic bottles are the basis of t...
View full details
Base leaf ghillie suit from Invader Gear. One size fits all, that is to say most adult sizes. Over sized hood for for uninhibited head movement. T...
View full details
Base leaf ghillie suit from Invader Gear. One size fits all, that is to say most adult sizes. Over sized hood for for uninhibited head movement. T...
View full details
A super handy sized anti fog spray from Wiley X. Super slim, super small, fits into any small pouch or pocket. Comes with a plush polishing cloth....
View full details
Sold out
VFC have done a great job producing an accurate replica of the BCM Gunfighter stock. More pronounced cheekweld (SOPMOD type) Snag free design. No...
View full details
A highly realistic compensator for any 14mm CCW threaded barrel. Made from solid steel. Flat sides for tightening with a wrench. Dark grey colour...
View full details
Beautifully made CNC aluminium buffer tube for the Marui MWS and MTR. Available in black and tan, this is the tan version. High grade constructi...
View full details
Beautifully made CNC aluminium buffer tube for the Marui MWS and MTR. Available in black and tan, this is the black version. High grade construc...
View full details
A comprehensive, perfectly matched barrel/hop-up set from Angry Gun for the Marui MWS series. Includes: 250mm carbon steel inner barrel with 6.03...
View full details
Heavy-duty push-button QD sling swivel with 1" loop Made from high strength steel. Accepts up to 1" slings Push button quick release. Weight: 38g
Steel bolt stop catch for the Marui MWS GBBR. Material: Steel with QPQ Coating For Tokyo Marui M4 MWS/MTR series
The Tokyo Marui SAA.45 Spring Revolver is the quintessential spring airsoft revolver. Although this is a plastic spring action model gun that is m...
View full details
Sold out
The cylinder head designed to prolong gearbox shell life and provide the perfect seal to achieve best results. The shock-absorbing bumper noticeab...
View full details
Sold out
The Angry Gun L119A2 Rail from Angry Gun was inspired by the UKSF L119A2. Available in both Carbine (long) and CQB (short) version. It is compatib...
View full details
The PTS Enhanced Polymer M-LOK Rail Covers Set are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards. This ...
View full details
Sold out
The PTS Enhanced Polymer M-LOK Rail Covers Set are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards. This ...
View full details
The PTS EPF-M (Enhanced Polymer Grip-Modular) is designed to directly mount onto an M-LOK rail system. The CNC machined aluminum locking system is...
View full details
The PTS EPF-M (Enhanced Polymer Grip-Modular) is designed to directly mount onto an M-LOK rail system. The CNC machined aluminium locking system i...
View full details
The MEC V piston head set for gas blowback pistols is an improvement over the stock pistol piston head, especially those with metal slides. This r...
View full details
The fully licensed PTS Griffin Armament Taper Mount series flash hiders are manufactured from steel alloy CNC machined with QPQ treatment. Specifi...
View full details
The fully licensed PTS Griffin Armament Taper Mount series flash hiders are manufactured from steel alloy CNC machined with QPQ treatment. Specifi...
View full details
The PTS Radian Raptor-LT™ Ambidextrous Charging Handle is the latest iteration of the revolutionary patented ambidextrous charging handle introduc...
View full details
The PTS Radian Raptor-LT™ Ambidextrous Charging Handle is the latest iteration of the revolutionary patented ambidextrous charging handle introduc...
View full details
This plate carrier from Invader Gear is infinitely customize able, with so many features and MOLLE panels it ideal for any load out. Wide should...
View full detailsSignup to the AirsoftEire.com mailing list to be the first to hear about new products and special offers
Copyright © 2024 AirsoftEire.