"72 Virgins Express" Velcro Patch
KombatUK
A PVC tactical patch with a velcro back. Size is approx 70mm x 50mm. Black and green in colour. CC.0.0.136
A PVC tactical patch with a velcro back. Size is approx 70mm x 50mm. Black and green in colour. CC.0.0.136
A PVC tactical patch with a velcro back. Size is approx. 72mm x 48mm. Black and glow-in-the-dark green in colour. CC.0.0.146
A PVC tactical patch with a velcro back. Size is approx. 80mm x 55mm. CC.0.0.108
A PVC tactical patch with a velcro back. Size is approx 50mm x 25mm. Black and dark grey in colour. CC.0.0.25
A PVC tactical patch with a velcro back. Size is approx 75mm x 55mm. CC.0.0.139
A PVC tactical patch with a velcro back. Size is approx 60mm x 60mm. OD, light OD and Brown in colour. CC.0.0.142
*A-Grade* - Ex Display - Mark on slide by slide catch, a normal wear mark that develops from slide catch being used. Minor mark on opposite side...
View full detailsBrand new, unused. Damage to top right hand corner, cut in fabric and foam. Please see pictures for reference. Custom made for the EVO 3 A1, this ...
View full detailsAs-new apart from some light cosmetic marks beside receiver pins and bolt release, see pictures for reference. Tested and functioning perfectly....
View full detailsUnused, one small cosmetic mark on side of goggle lens, see pictures. Includes protective case & goggle cover. A note on grades:A-Grade: Item...
View full details*B Grade condition* - Light cosmetic marks on lower receiver, bolt release, sling loop and rail, please see pictures for reference. Otherwise ...
View full details*B Grade Condition* - Some light cosmetic marks on rail, receiver, stock, flash hider & sights. Box has some cosmetic damage. Includes magazin...
View full details*B-Grade Condition* - As-new, some light scratches, no retail packaging. A note on grades: A-Grade: Item is as new, fully packaged, typically cu...
View full details*B-Grade* - Some light marks on magazine and slide, tested and functioning perfectly. Includes pistol, magazine, box, hop adjust tool & manua...
View full details*B Grade* - Excessive vapor released on filling valve whist charging with gas. Otherwise good condition and works as intended, suitable for use as...
View full details*B-Grade* - Small chip on inside of slide, this does not affect performance of pistol. Not noticeable from outside, tested and functions perfectly...
View full details*B-Grade* - Small marks on ejection port which are normal for Umarex Glocks after minimal racking slide/shooting. Includes box magazine & man...
View full detailsFew cosmetic marks on metal lace loops and exterior of boot - see pictures for reference. Rubber lip on rear of boot slightly out of place. Inclu...
View full detailsC-Grade - Non functioning - missing parts from hammer assembly - trigger does not drop hammer - suitable as a prop, for parts or repair. Includes ...
View full detailsSuitable as a prop/display or for parts, sold as seen. Slide gets stiff/stuck unless trigger is held in while racking slide and does not easily re...
View full detailsMagnum Storm Trail Lite are remarkably lightweight tactical trainers featuring a tight-weave technical mesh upper for enhanced breath ability. Ma...
View full detailsAbbey Blu Gel gives deep even blueing of gun barrels and other metal parts in a quick and easy to use solution. Benefits: You can reblue worn and ...
View full detailsNot suitable for airsoft guns. A high quality, light viscosity mineral oil with a powerful rust inhibitor additive. It is especially suited to all...
View full detailsNot suitable for airsoft guns. A high quality, light viscosity mineral oil with a powerful rust inhibitor additive. It is especially suited to all...
View full detailsAbbey Gun Clean breaks down and removes all fouling from shotgun and rifle barrels. Its fine water dispersant qualities ensure no rain or moisture...
View full detailsNot recommended for airsoft guns. Gun Lube SM50 is the recommended lubricant for high velocity moving parts, air gun compression chambers, firing ...
View full detailsA replacement loading nozzle for the Action Army AAP01 pistol. This is the original part #71, a replacement for any pistol with a damaged or worn ...
View full detailsA steel RMR adapter & front sight for the Action Army AAP01 pistol. Allows you to mount an RMR dot sight to your AAP pistol. Steel construction.
A quality CNC'd aluminium thumb stopper for the AAP01. Provides the shooter with a more comfortable grip. Includes mounting hardware. Available in...
View full detailsThe resupply kit from Airsoft Innovations contains: Three different coloured body stickers Three replacement spoons Three replacement pins. Suitab...
View full detailsThis shotgun shell holder allows you to hold and detach four shotgun shells quickly and easily. Holds smaller brands of 2.25" shotgun shell, like ...
View full detailsThe latest in a new line of high quality slings from Amomax. Features a new level of padding across 50% of one side of the sling, allowing for pro...
View full detailsPadded single point sling for right or left-handed shooters Fully adjustable to fit any gear or body armour. Heavy duty construction. Features q...
View full detailsPadded single point sling for right or left-handed shooters Fully adjustable to fit any gear or body armour. Features quick detach release buckl...
View full detailsThis is a drop-leg platform for the Amomax series of quick release polymer holsters. Ideal for those seeking a fast draw, leg-mounted solution for...
View full detailsThese button-activated, quick release polymer holsters from Amomax are phenomenal value for money. A knurled attachment point on the rear allows t...
View full detailsSignup to the AirsoftEire.com mailing list to be the first to hear about new products and special offers
Copyright © 2025 AirsoftEire.