VB Power Simple LCD Display 1-6S Lipo Voltage Meter

€9.99
SKU 28660
  • This is an essential tool if you own and operate Li-Po or Li-Ion batteries.
  • This handy little circuit plugs into the balance lead on any 3.7V-11.1V Li-Po battery and displays the voltage for each cell, one after another on its 7-segment display.
  • At the end of the of display cycle, it also displays the total combined voltage of all cells, i.e. the total voltage output of the battery.
  • Allows you to keep an eye on the health of your battery's cells. Also useful in diagnosing problems in particular cells.
  • Works with 3.7V, 7.4V and 11.1V Li-Po batteries of all amperages.
  • Only 40x19x8mm in size.
  • To use the chip, simply plug your balance lead on to the outer-most pins of the board. If it does not start displaying the voltage, unplug and rotate the balance lead 180 degrees. If this fails, repeat these two steps on the outermost pins on the other side of the board until the screen starts displaying the voltage readings.
  • Circuit board colour may vary between green and red.

 

You recently viewed

Clear recently viewed